Pinning the 0.4 kW slot on an S200 line
The 1FL2103-4AG11-1HC0 is the small-frame end of the SIMOTICS 1FL2 servomotor family — 0.4 kW rated power at 200 V 3AC, with stall and rated torque both at 1.27 Nm and a rated speed of 3000 rpm, sized for the conveyor, indexing table, light feeder or small pick-and-place axis that sits behind a SINAMICS S200 drive section rather than a larger S210 cabinet. The 30 mm shaft height, integrated holding brake, hybrid connector and 17-bit absolute encoder make this the variant specified where the S200 needs a complete, pre-matched axis from the factory rather than an open-loop induction machine with an external resolver.
Mechanical and environmental envelope
Shaft height 30 mm with the standard keyway (tolerance N) and a holding brake clears it for vertical-axis holding without a third-party brake resistor on the gearbox; when the oil-seal option is fitted the body is rated IP65 with oil seal per the nameplate, meaning washdown and cutting-fluid splatter in the cell are inside the envelope, and the seal barrier must be respected at the shaft pass-through during reassembly. The hybrid connector carries both power and the 17-bit encoder on one body, so cable routing is a single cordset from cabinet to motor rather than a separate resolver run — order the matching Siemens pre-fabricated cordset to keep the encoder pairing.
Procurement classification for the BOM trail
Lifecycle is recorded as current on the active Siemens catalogue line, Group Code R220, Product Group X0DJ, sold in single-piece increments and shipped in a 315.00 x 182.00 x 172.00 mm carton as the factory-stock unit — no replacement MPN has been announced and the same order code applies for spares on an existing S200 line as for new builds. RoHS compliance has been confirmed since 01-01-18 and REACH Art. 33 candidate-list information is available on request; the part is not flagged for export-control licensing (AL:N / ECCN:N), which keeps cross-border shipment paperwork straightforward for a turbine retrofit or packaging-line export build.
Sourcing posture
The product class is built-to-order, so the motor ships configured to the SINAMICS S200 firmware pair it was ordered against rather than as generic shelf stock — order quantities and current lead time are confirmed against an RFQ through independent industrial distribution, with no immediacy promise and no published price on this listing.