What the ratings mean on the bench
The 1FL2104-2AF00-0MC0: Supply voltage is 400 V 3AC with a rated power Pn of 0.75 kW at a rated speed Nn of 3000 rpm, and both standstill torque M0 and rated torque Mn are 2.4 Nm — the equal M0/Mn figures indicate the motor is sized for continuous-duty operation near its rated point rather than a high-overload peak-duty profile. Shaft height 40 mm with IP54 protection class (without oil seal) defines the mechanical envelope: the motor is suited to dry, semi-protected industrial cabinets and machine interiors, but the IP54 rating (not IP65 or higher) means washdown or food-grade environments are outside its sealed-duty spec. Encoder is AM21bit absolute multi-turn over the hybrid connector, with a plain shaft (Tolerance N) and no holding brake — so any Z-axis gravity-load retention or safety-stop holding must come from the SINAMICS S200 drive's brake management or an external mechanism.
Compliance documentation and substance controls
RoHS compliance is declared since 01-01-18 with REACH Art. 33 candidate-list information supplied through the standard Siemens Reach Information channel — so the EU substance-restriction paperwork for customs and end-customer declaration packs is covered on the manufacturer's side.
Logistics footprint
Each unit ships individually packaged at 382 × 222 × 240 mm — the motor's physical volume is modest, but the single-piece per-pack configuration means crating density for multi-axis orders needs to be planned around one carton per axis.