What this servo is and where it lands
The 1FL2104-2AF01-1SC0 is a SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family sized for the SINAMICS S200 drive platform, with a 0.75 kW rating at 400 V three-phase and a rated speed of 3000 rpm at continuous torque of 2.4 Nm. It carries IP65 protection with an oil seal, a hybrid (AS-i) connector, a keyed shaft with N tolerance, and no holding brake — meaning this is the unbraked variant chosen where the load is back-driven or held by the mechanics, not the motor.
Lifecycle, part class, and what that means for the BOM
Lifecycle status is recorded as active and the part sits in Product class C — manufactured to order, non-returnable, and not re-usable, so every unit pulled into a build needs its own line on the purchase order rather than a generic safety stock.
Sizing notes for the integrator
At 2.4 Nm continuous with 0.75 kW output at 3000 rpm, this is the small-frame 1FL2 (shaft height 40 mm) — sized for light conveyor, indexing, or pick-and-place axes on an S200 line where the holding brake is supplied externally or is not required. The hybrid AS-i connector on the motor side mates to the SINAMICS S200 power-and-feedback cable set, so cable selection (length, shielding, connector variant) is dictated by the S200 system cable list rather than third-party options.