Where this 1FL2 slot fits in the SINAMICS S200 line
The Siemens 1FL2104-2AF11-0SC0 is a 1FL2-series low-inertia servomotor from the SIMOTICS family, specified to run on a 400 V 3AC supply with a rated power of 0.75 kW and a rated speed of 3000 rpm — a continuous stall and rated torque of 2.4 Nm makes it a match for small rotary loads such as indexing tables, light conveyors, and packaging axes on machines built around the SINAMICS S200 drive platform.
Shaft, brake, and IP65 — what the suffix string locks in
The motor ships with a plain shaft (tolerance N), an integrated holding brake, and a shaft height of 40 mm — the brake parks the axis during power loss and the keyed shaft accepts the standard coupling or pulley stack-up for that frame size. Protection class IP65 with oil seal is the rated enclosure figure, meaning the housing resists dust and low-pressure water jets from any direction, so the motor can sit on the machine frame near coolant splash or in a wash-prone area — the oil seal at the shaft exit is the wet-end barrier and needs to be checked at service intervals. The 21-bit hybrid connector (AS-i style physical layer, single-cable variant) is the power-and-feedback interface; commissioning requires the SINAMICS S200 matching drive side, with the feedback and power combined in one cable rather than separate resolver and power leads.
Compliance posture for the audit trail
Compliance with the substance restrictions of the RoHS directive is documented as in effect since 01-01-18, and REACH Article 33 duty to inform is flagged on the product record, so the declarations a supplier-quality review asks for are available from the manufacturer rather than requiring a customer-side test report. Export control is recorded as AL:N / ECCN:N, which clears the part for general export without a per-shipment licence review; the Group Code R220 and Product Group X0DK fields are the internal identifiers a procurement system uses to route the line into the Siemens servo-motor catalog segment.
Sourcing posture for this order code
Product class C on this line indicates the unit is produced to order rather than held as returnable shelf stock — order quantities are confirmed against the BOM at quote time and packaging is a single piece per pack at 382.00 x 222.00 x 240.00 mm, which matters for any cross-border shipment planning rather than day-to-day shelf handling.