What this motor is — and where it sits in the drive stack
The 1FL2104-2AG01-0HC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family, built to run on a SINAMICS S200 drive — rated 200 V 3AC supply, 0.75 kW rated power, 3000 rpm rated speed, with matched 2.4 Nm standstill and rated torque at 40 mm shaft height. It's the low-inertia class Siemens pairs with the S200 for positioning and dynamic response, not heavy continuous-torque duty. The motor ships with a hybrid connector, no holding brake, a plain shaft to N tolerance, and IP65 protection with an oil seal — meaning the body holds up to oil mist and coolant splash typical of a machine-tool or packaging environment. Without a brake, this build suits applications where the drive's regenerative hold or a separate mechanical brake handles the stop duty.
Production status and what it means for the BOM
Siemens tags this listing as product class C — built to order, non-returnable against credit — so spares planning should account for the build-to-order lead rather than a stocked distributor shelf.
Matching it to the S200 drive and the panel side
Because the motor is specified for the SINAMICS S200 platform, commissioning is a matched pairing rather than a parametric pick — the drive auto-identifies the connected 1FL2 via the electronic nameplate, so the encoder resolution (17-bit AS) and torque/speed limits are read directly from the motor. The 200 V 3AC supply rail and 0.75 kW rating slot into the S200's lower power range; cabinet heat dissipation and breaker selection follow from the drive sizing, not the motor alone.