Servo definition and sizing match
Siemens 1FL2104-2AG01-1MC0 is a SIMOTICS S-1FL2 low-voltage servo motor from the 1FL2 family, designed to operate exclusively with a SINAMICS S200 drive. The shaft height is 40 mm, supply is 200 V three-phase, and the rated output is 0.75 kW at 3000 rpm with 2.4 Nm standstill torque and 2.4 Nm nominal torque. Per the specification, the 0.75 kW power figure and 2.4 Nm torque at 3000 rpm define the working envelope the drive must command — the S-1FL2 is a compact class, so the matched SINAMICS S200 converter setpoints should be loaded from the motor's electronic nameplate rather than entered manually. Mechanical configuration: shaft height 40 mm, shaft key with Tolerance N fit, AM21bit hybrid encoder connector, no holding brake, IP65 protection class with oil seal at the shaft. The IP65 with oil seal rating makes the unit suitable for industrial cabinet-side mounting where occasional shaft-zone contamination is expected.
Traceability and tender-grade documentation
Group Code R220 and Product Group X0DK identify the line in the manufacturer's internal classification scheme, which is what a procurement audit trail expects to see on the despatch note and declaration of conformity. The unit is compliant with the substance restrictions of the RoHS directive since 01-01-18, and the manufacturer has issued REACH Article 33 duty-to-inform coverage per the current candidate list. For audit purposes, both statements are evidenced on the official datasheet as required for framework agreements.
Production status and sourcing posture
Lifecycle stage is recorded as current and product status is Active on the manufacturer's record, so the part is in ongoing production. The product is classified as class C — products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit. Each unit is built per order with quantity unit 1 piece, so spares carry a confirmed-build lead time rather than a stock draw.
Packaging and handling
Single-piece packaging dimensions are 382.00 x 222.00 x 240.00 mm, consistent with the SH 40 mm compact-servo class and suitable for repack-in-crate shipping to a panel builder's goods-in bay.