What the order code names on the line
The 1FL2104-2AG10-1HC0 is a SIMOTICS S-1FL2 low-inertia servo, 0.75 kW rated, sized for the SINAMICS S200 drive family and built to the 1FL2 shaft-height-40 mm frame. Group code R220 and product group X0DK sit on the configurator for that exact motor rating, so quoting against either line on the BOM lands on this part. Lifecycle reads as active under the current stage, so the part can be specified into a new build rather than treated as a phase-out or last-time-buy item.
Ratings translated to sizing
Supply voltage is 200 V 3AC, with Pn = 0.75 kW and Nn = 3000 rpm on the rating plate — a 200 V-class axis on the SINAMICS S200 rather than a 400 V fit. Both M0 (stall) and Mn (rated) torque read 2.4 Nm, so the motor is sized for continuous operation at rated torque without needing an oversized frame for peak duty. The encoder is a 17-bit hybrid (absolute, single-turn) and the motor ships with a holding brake — meaning the drive commissioning needs the brake release input and the absolute-position reference chain on the SINAMICS S200 mapped before first energisation, otherwise the axis will hold in brake and refuse to follow setpoint moves on power-up. Mechanical fit is shaft height 40 mm with shaft-key mounting and tolerance N, IP54 enclosure without an oil seal — that IP rating is suitable for cabinet-internal or sheltered-machine mounting, not for washdown or food-grade lines where an oil-sealed IP65/IP67 build would be required.
Compliance and orderability
RoHS compliance has been on the record since 01-01-18, and the part carries the REACH Art. 33 duty-to-inform per the current candidate list — both items matter when the motor ships into an EU-bound build. Export control markings read AL:N / ECCN:N, so routine cross-border shipment is not gated by a licence. Product class C applies: manufactured or produced to order, not returnable for credit. The quantity unit is one piece, so each line on the PO is a single motor, and packaging dimensions of 382.00 x 222.00 x 240.00 mm set the inbound carton footprint for receiving.