What the 1FL2104-2AG10-1MC0 is on the panel
The 1FL2104-2AG10-1MC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the Siemens 1FL2 family, sized at 0.75 kW continuous with a rated speed of 3000 rpm and a stall/continuous torque of 2.4 Nm, supplied as a three-phase 200 V unit with a 40 mm shaft height and a holding brake built in. The compact housing carries IP54 protection without an oil seal, terminates through a hybrid connector, and pairs specifically with the SINAMICS S200 drive family listed in the model string. In a panel or machine build, this motor typically sits on the load side of a SINAMICS S200 converter and drives positioning axes — conveyor tracking, small-format indexing tables, packaging heads, lab automation, and similar dynamic-motion loads where the 2.4 Nm continuous torque and 3000 rpm speed envelope match the mechanical demand.
Lifecycle, ordering class, and what that means for the BOM
The product is classified as class C on the Siemens ordering sheet: a build-to-order item that is produced against the purchase order and cannot be returned for credit. For the procurement side this is the binding detail — plan the quantity carefully on the RFQ because a class C motor placed against a build slot is not coming back as stock credit if the spec turns out wrong. Export control is dual-listed as AL:N / ECCN:N, so the part ships without a U.S. export-licensing flag for routine destinations, though the buyer is still responsible for end-use and sanctions screening on the order.
Compliance paperwork the documentation pack carries
REACH Article 33 candidate-list information is referenced through the standard Siemens Reach Information path, which is how Siemens discharges the duty to inform on articles containing substances of very high concern.
Packaging, identification, and group codes on the box
Orderable and shipped one piece per quantity unit, in a pack dimensioned 382.00 x 222.00 x 240.00 mm, which is the footprint to budget when sizing the receiving-incoming cage for a build line. The Siemens group code R220 and product group X0DK on the listing are the cross-reference keys used to match the motor on a reorder, an RMA, or a declaration-of-conformance request.