0.75 kW at 3000 rpm in a 40 mm-frame servomotor
The 1FL2104-2AG11-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family, sized for 200 V 3AC drives and built to pair with the SINAMICS S200 servo converter — the matching drive is explicitly called out on the product description rather than being a generic fit. Its headline ratings — 0.75 kW rated power, 3000 rpm rated speed, and 2.4 Nm both at standstill and nominal — sit in the 40 mm shaft-height frame that 1FL2 uses for low-inertia motion in packaging, pick-and-place, and small-format machine axes.
Mechanical build that drives fit on the machine
The motor ships with a plain shaft (tolerance N), a holding brake for vertical-axis and quick-stop duty, and a hybrid AS21 connector that carries power and the absolute encoder in one plug — which is what keeps the cabinet-side wiring to a single cable run back to the S200. Protection class IP65 with oil seal is specified at the shaft entry; in practice that means the motor tolerates coolant mist and light washdown on a packaging or food-adjacent line, but the oil-seal designation is the difference between it surviving a splash zone and failing where cutting fluid or oil pools around the shaft. Encoder feedback is the absolute 21-bit variant (AS21), so position is retained across power cycles without a homing move on every restart — important for machines that lose orientation on E-stop and recover automatically.
Built-to-order class, current production
Siemens lists the part under product class C — built to order, non-returnable — and group code R220 / product group X0DK, the catalog identifiers maintenance will quote when pulling this line off the storeroom shelf or raising a requisition. Lifecycle status is current per the manufacturer record, and the RoHS compliance date is 01-01-18; REACH Art. 33 information is published and export-control classification is ECCN N / AL:N, so it ships into the usual commercial channels without a licence gate.
Sourcing the 1FL2104-2AG11-0SC0
Because the part is built to order and not returnable, the right move is to quote it against the BOM quantity with the SINAMICS S200 drive line item attached — pricing and lead time confirm at RFQ rather than off a shelf price. Shipping footprint is a single-piece carton at 382 × 222 × 240 mm; for spares planning, that is the bench space a tech needs to receive and inspect the motor before it goes into the machine.