0.75 kW low-inertia servo with factory-fitted brake
The 1FL2104-2BF11-0MC0: The SIMOTICS S-1FL2 servo motor in this code is built for the SINAMICS S200 drive line — a 400 V 3AC unit rated Pn=0.75 kW at Nn=3000 rpm, with both standstill torque M0 and rated torque Mn at 2.4 Nm, sized for shaft height 40 mm applications where low rotor inertia matters more than raw torque. The motor ships with a holding brake already assembled, a 21-bit hybrid (single-cable) connector, plain shaft with tolerance N, and IP65 sealing with oil seal — the level most lines expect when the servomotor sits near coolant, lubricant mist, or a washdown zone rather than in a clean cabinet.
Matching drive and commissioning context
This variant is specifically listed as the matching drive for SINAMICS S200, so the encoder protocol, cable assignment, and electronic nameplate read straight from the motor at first power-up — no manual parameter entry for the resolver or pole count on commissioning day, just the drive's auto-configuration routine picking up the 21-bit hybrid encoder. Sizing-wise, 2.4 Nm continuous at 3000 rpm puts the unit in compact-machine territory — small-format packaging conveyors, indexing tables, laboratory automation, and end-of-line label or print heads, where the brake holds the axis at rest between moves without an external clamp.
Compliance documentation on file
No UL/IEC file numbers are stated in the listing itself — those approvals travel with the SINAMICS S200 system bundle rather than this motor SKU.