Where this 0.75 kW fits on the SINAMICS S200 line
The 1FL2104-2BG01-0HC0 is a SIMOTICS S-1FL2 low-inertia servo in the 40 mm shaft-height frame, rated 200 V 3AC supply with a rated power of 0.75 kW, a rated speed of 3000 rpm, and 2.4 Nm on both the static M0 and rated Mn torques — so the motor has no continuous-duty derate between standstill and rated speed, which makes it well-suited to short-cycle point-to-point and indexing loads rather than long high-torque dwells. The encoder is the 17-bit absolute single-turn (AS17bit), the shaft is plain with Tolerance N, and there is no holding brake, so any axis that must hold position with the drive un-powered needs a separate mechanical brake or a vertical-axis counterbalance. Protection is IP65 with oil-seal on the shaft — the housing tolerates coolant splash and oil mist typical of a machine-tool or parts-washer environment, but the cable entry must use the matched hybrid connector family to keep that IP rating at the panel face; the drive end is the SINAMICS S200 PN, so the controller, the cables, and the motor extensions must all come from the same S200 ecosystem to land the commissioning without adapter harnesses.
Sourcing posture and lifecycle read
Lifecycle status is active, so the part is in current Siemens production and is not flagged for last-time-buy; the product class C designation on this code means it is built to order rather than held as finished-goods shelf stock, so availability is governed by Siemens factory allocation rather than distributor on-hand quantity — lead time on a class-C servo is quoted at RFQ against the requested quantity and the configured mating drive and cable set. Compliance carries since 01-01-18 RoHS conformity plus REACH Art. 33 duty-to-inform per the current candidate list, so EU shipment of the motor itself is unblocked at the substance-restriction level; no UL/IEC approvals are on this ledger slice, so for a North American panel build the integrating OEM should confirm the SINAMICS S200 system's overall listing rather than assume the motor alone carries a UL mark. Group code R220 and product group X0DK align the PO line with Siemens' internal ordering grid — hand both to purchasing when raising the order so the factory entry is matched to the configuration rather than parsed from the description string.