Where it drops into the cabinet
The 1FL2104-2BG11-0HC0 is the SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family sized for the SINAMICS S200 drive platform — a 200 V 3AC input, 0.75 kW / 2.4 Nm continuous / 3000 rpm motor with a 40 mm shaft height and a holding brake built in, terminated through a hybrid connector. IP65 with oil-seal and a tolerance N plain shaft means the motor takes a typical vertical-mount machine frame where the body faces coolant mist or cutting chips — the rating governs the sealing at the cable entry and the shaft through-hole, not the connector face once the mate is seated. Single-piece packaging at 382.00 x 222.00 x 240.00 mm and the "made-to-order / non-returnable" product class flag means the motor ships as a configured unit from the factory, not a shelf-stock item — order matching by the printed nameplate at receiving, not by generic catalog row.
Sizing and torque headroom
At 0.75 kW with a continuous stall and rated torque both at 2.4 Nm, the motor sits at its rated point near 3000 rpm — the stall figure equalling the rated figure tells you this is a low-inertia machine sized for high-acceleration cycles rather than for running near the thermal ceiling on continuous draw. Pairing the motor with the SINAMICS S200 keeps the commissioning profile inside one vendor's controller/drive/motor envelope, so the resolver-style position feedback (the 17-bit single-turn listed in the nameplate) autotunes without cross-vendor firmware bridges — confirm the drive firmware revision slot before the line runs first product.
Lifecycle, compliance, and the supply path
Compliance documentation carried by the manufacturer for this part includes RoHS conformity since 01-01-18 and REACH Article 33 disclosure against the current candidate list — neither approval is the same as a regional safety certification, so a UL/IEC safety review for the end equipment still falls back to the integrator.