Part identity and what it drives
The 1FL2104-2BG11-0MC0 is a SIMOTICS S-1FL2 low-inertia servomotor rated 0.75 kW at a rated speed of 3000 rpm, with a standstill torque (M0) and rated torque (Mn) of 2.4 Nm each on a 40 mm shaft height, supplied as a 200 V 3-phase unit with an integrated holding brake and a 21-bit hybrid (AM21) encoder, paired with the SINAMICS S200 drive. Group Code R220, Product Group X0DK — the order class is built-to-order and the item is non-returnable, so the configuration string itself has to be confirmed against the panel drawing and the SINAMICS S200 project file before the PO is cut.
Mechanical and environmental envelope
Plain shaft, tolerance N, IP65 protection class with oil seal, and a hybrid connector AM21bit — that combination is the field-side envelope to spec into: sealed against light coolant and oil mist, single-cable hybrid power/signal interface to the drive, and a keyed feedback channel that the SINAMICS S200 auto-commission reads on first connection.
Receiving and storage
Ships as a single piece in packaging 382.00 x 222.00 x 240.00 mm — note the 1-piece pack quantity and the non-returnable order class when planning spares holding, because each unit that gets opened and rejected becomes a sunk cost rather than a credit.
Lifecycle stage is recorded as current, with the manufacturer flagging product status Active — meaning the 1FL2104-2BG11-0MC0 is still on the official build slate rather than a phase-out tail, but because the order class is built-to-order and non-returnable, real availability has to be confirmed against an RFQ rather than pulled from shelf stock.