Form factor and what ships
The 1FL2104-4AF00-0HC0 ships from the 1FL2 servomotor line built around a 40 mm shaft height, dressed with a hybrid cable connector, a plain shaft at tolerance N, and no holding brake — a clean low-inertia package sized for the SINAMICS S200 drive platform. One-piece order unit, packed 382.00 x 222.00 x 240.00 mm; class C (made-to-order, non-returnable) so the BOM line should be sized to the build, not over-stocked.
Electrical envelope and what it drives
Rated Pn=1 kW on a 400 V 3AC supply, Nn=3000 rpm with M0=Mn=3.2 Nm — a constant-torque envelope across the working speed range, so the motor holds its rated torque up to base speed rather than dropping into a constant-power taper. An AS 17-bit absolute encoder closes the position loop, which is the resolution a SINAMICS S200 axis expects for high-dynamic positioning without homing drift after power cycles. Protection class IP54 with no oil seal — a panel-side or cabinet-mounted servo, not a through-shaft or washdown station; oil-mist and coolant exposure need an upgrade on the BOM line.
Lifecycle and compliance posture
RoHS compliance is declared since 01-01-18, and REACH Art. 33 duty-to-inform applies per the current candidate list — both are the compliance hooks a supplier-quality audit will pull on first contact.