1 kW / 3.2 Nm frame for SINAMICS S200 axes
The Siemens 1FL2104-4AF11-0HC0 is a SIMOTICS S-1FL2 low-inertia servo in the 40 mm shaft-height frame, sized at 1 kW rated power with 3.2 Nm continuous torque at 3000 rpm on a 400 V 3AC supply — the holding brake and plain shaft with tolerance N are part of the build, and the matched drive is the SINAMICS S200. It belongs to the 1FL2 servomotor family designed for the SINAMICS S200 drive platform, so the hybrid connector and the 17-bit absolute encoder single-turn are keyed to that ecosystem rather than to the legacy S210/V90 wiring.
Sealed for washdown-adjacent machine cells
Protection class IP65 with oil seal on the shaft side, so the motor body tolerates directed water jets and cutting-fluid splash — fine for machine-tool envelopes and food-adjacent packaging lines, not for submerged duty. The hybrid connector carries power and feedback in one shell, which simplifies panel-side gland layout and reduces the cable count per axis on the S200 harness.
Made-to-order class — freeze the BOM before release
Siemens classifies this order code as Product class C: manufactured or produced to order, non-returnable, non-reusable — so a wrong spec on the PO translates into a stranded unit, not a credit memo. Lifecycle status is active, meaning the part is still being built to order rather than phased out, and RoHS compliance has been in force since 01-01-18, with REACH Article 33 candidate-list information supplied per the current list. Export control is AL:N / ECCN:N, so cross-border shipment does not require an export licence on the part number itself — paperwork risk sits with the consignee end-use declaration rather than the commodity code.
Carton footprint and handling note
Each unit ships as a single piece in a 382 x 222 x 240 mm carton — small enough to store on a standard spare-parts shelf rather than a pallet rack.