Match-up with SINAMICS S200 at 200 V 3AC
The 1FL2104-4AG00-0SC0 is a SIMOTICS S-1FL2 low-voltage servomotor built to pair with the SINAMICS S200 drive system, sized at 200 V 3AC supply, 1 kW rated power and 3000 rpm rated speed with a 3.2 Nm standstill torque M0 and a matching 3.2 Nm rated torque Mn. Because M0 equals Mn at 3.2 Nm, the motor holds rated torque continuously down to zero speed — relevant for vertical-axis or push-and-hold moves where the cell cannot tolerate torque drop in the dwell. The 40 mm shaft height, plain (non-keyed) shaft with N tolerance, and 21-bit hybrid encoder on the AS21 connector signal the standard S-1FL2 mounting face; mating to the S200 is via the hybrid connector, not a separate signal cable.
What the ratings decide for the cell layout
IP54 protection without an oil seal means the motor is suited to dry cabinet interiors and machine-room air, not washdown or wet-cutting environments — drop it into a sealed cabinet where oil mist and coolant splash cannot reach the shaft seal. The plain shaft, N tolerance, ships without a holding brake; any brake-equipped position in the BOM belongs to a different 1FL2 variant, so confirm the -0SC0 suffix against the axis function before specifying the gearbox or coupling. Hybrid connector integration keeps the feedback and power on one plug, which shortens the cabinet-to-motor cabling path and reduces the handshake points that can delay servo enable — a real cycle-time saver when the cell is handshake-bound, not torque-bound.
Compliance and order code metadata
Lifecycle is recorded as current (active), and the order carries no export-control flag — AL: N and ECCN: N — so cross-border shipment is not gated by classification paperwork beyond the standard commercial invoice. RoHS compliance since 2018-01-01 and REACH Art. 33 duty-to-Inform status apply to the part; documentation is the standard Siemens material-compliance package rather than anything part-specific beyond the nameplate and declaration. Product class is C — manufactured to order, non-returnable and non-reusable — and the packaging quantity is one piece per shipper at 382 x 222 x 240 mm, so spares should ride alongside the production build, not be drawn from a returnable pool. Group code R220 and product group X0DK sit on the order header for ERP line-coding; carry them verbatim into the BOM so the procurement system maps the right manufacturer line, not a generic motor commodity code.
Sourcing posture
For a line-down spare, the carry position is one-piece match on the order code suffix, not a parametric search — the plain shaft / no-brake / 21-bit encoder combination is what makes the unit drop-in on a stripped axis.