Form factor and where it lands
The 1FL2104-4AG01-0HC0 ships as a SIMOTICS S-1FL2 low-inertia servo in shaft height 40 mm, with an integrated hybrid cable connector, a plain shaft to tolerance N, and no holding brake — the package Siemens lists for direct pairing with the SINAMICS S200 drive line. Carton dimensions come in at 382.00 x 222.00 x 240.00 mm, so the motor body sits in a small-format servo envelope suitable for tight machine frames where short-length cable runs back to the S200 drive cabinet.
Ratings that decide the fit
Supply voltage is 200 V 3AC with a rated power Pn of 1 kW at a rated speed Nn of 3000 rpm — the standstill torque M0 and rated torque Mn both come in at 3.2 Nm, so the motor delivers full torque from zero speed up to base speed without field weakening. Protection class IP65 with oil seal means the housing tolerates coolant splash and oil mist common around machine tools and packaging skids, and the 17-bit hybrid connector carries both power and the absolute encoder feedback back to the SINAMICS S200 in one cable.
Lifecycle, compliance, and the quoting reality
Lifecycle stage reads as current and the official status is Active, so the motor is still being built into the S200 ecosystem and not relegated to the discontinued register. Group Code R220 / Product Group X0DK is the internal classification Siemens ships against this 1FL2 line — useful when raising an RFQ or matching a BOM header against the vendor portal.
Sourcing posture
With product class C sitting on top of an active lifecycle, the practical path is a quoted-to-order buy against the BOM line — pricing, lead time, and cable-length bundle options all confirm at RFQ time rather than off a price sheet.