Sizing a 1 kW slot on a SINAMICS S200 line
The 1FL2104-4AG10-1MC0 is a SIMOTICS S-1FL2 servomotor in the 1FL2 family designed to pair with the SINAMICS S200 drive — the shaft-height 40 mm frame, 200 V 3AC supply, and Pn=1 kW continuous figure align it with the smaller end of that drive's motor portfolio. Continuous and stall torque are both listed at M0=3.2 Nm / Mn=3.2 Nm at Nn=3000 rpm, which means the motor delivers the same torque at standstill as at rated speed — useful where the axis holds position under load between moves rather than only while running.
Brake, feedback, and what actually ships in the box
Holding brake is fitted, so the axis holds position when the drive enables are removed — wire the brake through the SINAMICS S200 brake control, not the main motor power terminals, or the release timing fights the enable. The feedback is the AM21bit absolute encoder (multi-turn, 21-bit) via a hybrid connector — the hybrid cable carries power and feedback in one assembly, which simplifies the cabinet-to-axis routing compared with separate resolver and power leads. Shaft key with N tolerance is fitted; the shaft seal is not present, so plan mounting around an oil-free environment or fit an external guard where splash or lubricant mist is possible — the IP54 rating applies to the body, not the shaft exit, when no seal is selected.
Compliance and commercial class
RoHS compliance applies since 01-01-18, and REACH Art. 33 information is supplied with the product — the documentation pack needed for EU shipment is on the manufacturer's record, not something a buyer has to chase. The order class is built-to-order: the motor is produced against the purchase order, non-returnable, non-reusable, so a line that drops this into a BOM should treat it as a planned-order line with forecast-driven releases rather than free stock. Export control is AL:N / ECCN:N — no licence triggers under the standard EU or US dual-use lists, which keeps cross-border project logistics simple for this code.
Sourcing posture for the 1FL2104-4AG10-1MC0
The lifecycle stage reads as current production, with no official second source or successor part listed for the 1FL2 family in the record carried here — pin-compatible alternatives in this line are not on file, so any swap has to be confirmed against the SINAMICS S200 firmware parameter list rather than assumed from the part code alone.