2 kW, 400 V, 3000 rpm — a 1FL2 built for the S200 shelf
Siemens 1FL2105-4AF11-1HB0 is a SIMOTICS S-1FL2 servomotor sized for a 400 V 3AC supply, rated 2 kW (Pn) at 3000 rpm nominal, with a 6.6 Nm continuous torque and 8 Nm stall (M0) — the M0/Mn margin is what carries the load through accel ramps without the drive tripping on current limits. Shaft height 52 mm, holding brake fitted, keyed shaft with N tolerance, AS17-bit angular connector, and IP65 with oil seal on the body. The drive side is fixed by design: this motor belongs to the 1FL2 family paired with the SINAMICS S200, so cabling, encoder feedback and parameter sets are matched at the platform level — a retrofit integrator can usually meet the existing line where it already runs an S200, without rewiring the cabinet back to a different servo platform.
Active product, ordered-to-build — what the lifecycle read means
Group code R220 and product group X0DK sit on the Siemens internal order line, and quantity unit is one piece per order code. Compliance covers RoHS substance restrictions since 01-01-18 and REACH Article 33 candidate-list obligations; export control is AL:N / ECCN:N, which keeps cross-border paperwork straightforward for standard commercial destinations.
Panel and machine-room fit
IP65 with oil seal on the housing means the body tolerates coolant mist and light oil exposure typical of a machine-tool bay — fine for a retrofit drop-in on a packaging, pick-and-place, or small-format CNC line, but not a washdown-rated food-zone mounting. The holding brake draws from the S200 drive's brake output, so no separate 24 V brake supply has to be added to the cabinet; the keyed shaft with N tolerance lets the existing coupling or pulley be reused if the previous motor shared the same shaft height. Shipping carton is 432.00 x 222.00 x 240.00 mm for a single piece — that footprint matters when an MRO planner is staging a replacement on a line-down call, since the spare needs to clear the same aisle and hoist path as the original.
Sourcing posture for the BOM line
This is a build-to-order Siemens motor with no distributor shelf stock in the normal sense — availability and pricing on 1FL2105-4AF11-1HB0 are confirmed at quote time, and the order quantity runs in single-piece units. For a retrofit drop-in on an existing SINAMICS S200 axis, it slots in as a direct order-code replacement; for a greenfield axis, it pairs natively with the S200 drive family without cross-platform re-engineering.