0.2 kW low-inertia servo for compact S200 axes
The 1FL2203-2AF00-1HC0 is a SIMOTICS S-1FL2 servo motor from the 1FL2 family, wired straight into a SINAMICS S200 drive on a 400 V 3AC bus. Continuous and stall torque are both 0.64 Nm, with a rated speed of 3000 rpm — at 0.2 kW rated power, the motor slots into the low-power end of the 1FL2 line where cycle time and torque density on a small axis matter more than absolute kW. It ships with a 17-bit AS encoder through a hybrid connector — single-cable feedback and power — which keeps the cabinet-side wiring to one connector pair per axis and removes the second feedback cable from the loop. Shaft height 30 mm with a keyed shaft (tolerance N) and no holding brake; use it on axes where a separate brake or a downstream mechanical lock handles the gravity / spring-load hold.
Duty envelope — IP54, no oil seal, 0.64 Nm continuous
Protection class IP54 with no oil seal means the motor is sealed against splashing and dust ingress but is not the right call for wet washdown or where cutting oil reaches the shaft — for that duty the motor shaft sealing version belongs on the BOM. At 0.64 Nm continuous through the full 0–3000 rpm constant-torque region, sizing is straightforward: a small-feed axis, a small-parts indexing table, or a lab/cleanroom pick-and-place — anywhere the 0.2 kW rating fits and the load inertia stays matched to the low-inertia rotor.
Lifecycle and sourcing — active, made-to-order
Lifecycle status is active per the manufacturer's record — no successor or replacement order code is listed for the 1FL2203-2AF00-1HC0. The product is classed as made-to-order, non-returnable (group code R220, product group X0DJ, product class C) — so the right way to bring it in is quoted against the actual panel or machine build quantity, not out of shelf-stock overflow. Compliance: RoHS-conformant since 01-01-18, REACH Art. 33 duty-to-inform applicable, ECCN/AL both N for export — standard commercial-industrial shipment, no controlled-export routing needed. Packaging is one piece per carton at 315 x 182 x 172 mm; drop it on the cabinet floor alongside the matching SINAMICS S200 power module so they ship and arrive together.