What it is and where it slots
The 1FL2203-2AF00-1SC0 is a SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family designed to pair with a SINAMICS S200 drive — sized at 0.2 kW on a 400 V 3AC supply with a rated speed of 3000 rpm and a stall/continuous torque figure of 0.64 Nm at a 30 mm shaft height. On the motor side it ships with a keyed shaft to tolerance N, a hybrid AS21bit feedback connector, and no holding brake — the layout the S200 commissioning profile expects when the load is held mechanically or by the drive's own braking ramp rather than a fail-safe brake. The protection rating is IP54 without an oil seal, so it is built for cabinet-internal or sheltered machine mounting rather than washdown or food-grade lines where an IP65 or higher rating would be the gating spec.
Production class, packaging, and what that means at the desk
Quantities are handled per piece with a single-piece pack footprint of 315 x 182 x 172 mm, which is the practical box size to plan around for panel-builder receiving benches and any reverse-logistics labelling. Group code R220 and product group X0DJ identify the part inside the Siemens ordering taxonomy — these are the strings a procurement system uses to land the correct product line when the order code is keyed in.
Compliance posture on record
The motor has been compliant with the RoHS substance restrictions since 01-01-18, and the Reach Art. 33 duty-to-inform applies against the current SVHC candidate list — both of these show up in the declaration pack rather than the order code itself. Export-control markings on file are AL:N / ECCN:N, meaning no specific export licence is triggered at the part level under the standard classifications, which simplifies cross-border paperwork.
Lifecycle read
The part is on the active lifecycle stage per the manufacturer's record, so there is no last-time-buy clock running on this code today — the BOM line can be specified forward without an immediate phase-out pressure.