Active production, SINAMICS S200 pairing
The 1FL2203-2AF01-0HC0 sits in the SIMOTICS S-1FL2 family as a low-inertia servo motor purpose-matched to the SINAMICS S200 drive platform, and the lifecycle record reads current — meaning procurement can order it against an active BOM line rather than chase last-time-buy inventory. Because the motor and drive are released as a matched set, sizing the motor's continuous torque against the application's RMS load — not just the peak — is what decides whether the SINAMICS S200 control loop stays deterministic to the cycle.
Electrical and mechanical envelope
Supply voltage 400 V 3AC with a rated power of 0.2 kW at a nominal speed of 3000 rpm, and the standstill torque M0 equals the continuous torque Mn at 0.64 Nm — a flat torque envelope across the speed range, which keeps the following error bounded under varying chip loads on a CNC axis. Shaft height 30 mm, plain shaft with tolerance N, no holding brake, AS17-bit hybrid connector: the absence of a brake simplifies the cable harness but means vertical-axis applications need a separate mechanical brake or counterbalance — pick the variant with a holding brake if the axis can free-fall on power loss. IP65 protection class with oil seal on a 30 mm shaft height points to a sealed unit suitable for splash and light coolant exposure typical of a machine-tool enclosure; the sealing integrity lives at the cable entry, so the hybrid connector must be mated with its specified counterpart to hold the rating.
Compliance and ordering metadata
Group Code R220 / Product Group X0DJ identifies the orderable SKU; product class C marks it as built-to-order with no return-for-credit pathway, so the BOM line is committed at order entry — quantity unit is one piece, packaging dimensions 315 x 182 x 172 mm.