1FL2203-2AF01-0MC0 — what the line card says
SIMOTICS S-1FL2 servo motor from the 1FL2 family, sized for the SINAMICS S200 drive platform. 400 V 3AC supply, 0.2 kW rated power, 3000 rpm rated speed, 0.64 Nm rated torque, with a 30 mm shaft height and IP65 sealing on an oil-sealed housing — meaning the body holds up against coolant splash and light washdown in a panel-side or machine-base mounting. Plain shaft, no holding brake, feedback through the AM21bit single-turn absolute encoder on a hybrid connector — so the motor ships as a clean rotary axis body with no axial park brake and no keyway, leaving brake selection and shaft machining to the panel builder.
Why those numbers matter for the BOM line
0.64 Nm stall torque that equals rated torque points to a constant-torque low-inertia frame — the motor delivers its full rated torque from standstill up to rated speed, which is the envelope a point-to-point axis or short-stroke indexing load actually sees. 0.2 kW at 3000 rpm is the working point the SINAMICS S200 will command; oversizing the drive for headroom is fine, undersizing is not. 400 V 3AC supply ties this motor to a three-phase industrial bus; the matching drive is the SINAMICS S200, and the AM21bit encoder resolves to single-turn absolute position — sufficient for incremental homing routines but not for a safety-rated multi-turn absolute axis without a battery-backed module.
Lifecycle, compliance, and the paperwork trail
Lifecycle reads as active current production. Product class is C — built to order, non-returnable, non-reusable — so any stocking decision has to plan around build lead time rather than shelf-pull. RoHS compliance declared since 2018-01-01, REACH Article 33 disclosure carried via the manufacturer's Reach Information page, and export classification AL:N / ECCN:N — meaning no special export license gating for most commercial destinations. No UL or IEC certification appears in the listing itself; that paperwork has to be pulled from the product documentation if the receiving panel needs third-party marks.