What the spec block actually describes
The 1FL2203-2AF01-1HC0 is a SIMOTICS S-1FL2 servomotor from the 1FL2 family intended for the SINAMICS S200 drive system, supplied as a 400 V 3AC unit rated at Pn = 0.2 kW with a rated speed Nn = 3000 rpm, a stall torque M0 of 0.64 Nm and a rated torque Mn of 0.64 Nm — the equal M0 and Mn figures mean the motor delivers its full-rated torque all the way to base speed with no constant-power roll-off in the working envelope. The mechanical package is a shaft-height-30 mm frame with an AS17bit hybrid feedback connector, a keyed shaft (tolerance N) and no holding brake, and the housing carries IP65 protection with an oil seal — IP65 here seals the body against jets and dust so the motor can sit close to the process without a separate enclosure, but it does not cover the open shaft end.
Matching drive and field-side fit
The matching drive is the SINAMICS S200, so this motor lands in panels built around that drive line and inherits its connector and encoder conventions rather than the older SINAMICS V90 wiring pattern — commissioning parts, cables and parameter sets should be cross-checked against the S200 manual before the install window. The export-control line reads AL: N / ECCN: N, so the part ships without a licence trigger to most jurisdictions; the RoHS compliance date is 01-01-18, and REACH Article 33 information is supplied via the standard Reach Information document set, which covers candidate-list substance disclosure for the EU market. Crated dimensions of 315.00 x 182.00 x 172.00 mm reflect the single-piece pack (quantity unit 1 piece) — the cell layout for receiving needs that footprint reserved, including the cardboard headroom, so the motor can be uncrated next to the cabinet it will be fitted into.
Lifecycle and supply posture
The product is classed as made-to-order (product class C), which is the standard Siemens handling for configured servomotors — built per order, not returnable against credit, with each unit assembled to the encoded variant rather than pulled from a stocked finished-goods bin.