Form factor and what ships
The 1FL2203-2AF10-1SC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 30 mm shaft-height frame, built as the matched rotating element of a SINAMICS S200 drive package and sold as a single piece per packaging unit in a 315.00 x 182.00 x 172.00 mm ship carton. On the shaft side it carries a keyed output with tolerance N, a holding brake, and a hybrid connector for power and signal; the encoder is the AS21bit absolute single-turn variant and the sealing is to IP54 without an oil seal.
Electrical envelope and load ceiling
Supply is three-phase 400 V, rated power 0.2 kW at a nominal speed of 3000 rpm, with stall torque and continuous torque equal at 0.64 Nm — meaning the motor is rated to deliver its full M0 figure in continuous duty at rated speed, so sizing is governed by the 0.2 kW point, not the stall figure. That envelope places the 1FL2203-2AF10-1SC0 squarely in the low-inertia, low-power slice of the SINAMICS S200 family — the typical fit is small-format positioning axes, light conveyor indexing, lab automation and feeder tables where the brake is doing real work holding the load at standstill.
Lifecycle, class, and compliance posture
The part carries lifecycle status Active and is produced to order under product class C — built per the configurator, non-returnable, non-reusable — so availability is a quote-to-order conversation, not a shelf pick.