Built for the SINAMICS S200 compact drive line
The 1FL2203-2AF11-0SC0 is a SIMOTICS S-1FL2 low-inertia servo motor designed to pair with the SINAMICS S200 — the compact servo drive platform the family was engineered around, so motor and drive share the hybrid connector pin-out and commissioning parameter set without an adapter card. 400 V three-phase supply, rated output Pn=0.2 kW, rated speed Nn=3000 rpm with stall and continuous torque both at 0.64 Nm (M0=0.64 Nm, Mn=0.64 Nm), so the motor delivers its full rated torque continuously without a duty cycle derate at base speed. The shaft height 30 mm frame, plain shaft with tolerance N, and an integrated holding brake make this variant a drop-in for the indexing and small-format positioning axes — small gantry Z-strokes, light-payload pick-and-place, and rotary tables where the brake holds position on power-loss.
IP65 housing, 21-bit hybrid connector
IP65 protection class with oil seal on the shaft exit — the sealing stack keeps coolant and cutting-fluid mist out of the bearing cavity, so the motor can sit inside a machine envelope next to a wet-side process rather than only on a clean cabinet shelf. Hybrid connector carries power and the 21-bit absolute encoder signal in one pluggable interface, simplifying the panel-side wiring layout compared to separate power and signal connectors and shortening the swap time during a fault.
Compliance and product-class posture
Product class C — manufactured to order, non-reusable, non-returnable — which sets the procurement expectation: the order is a make-to-order commitment and standard return credit does not apply, so the spec has to be locked before the PO releases.
Lifecycle and procurement posture
Packaged 1 piece per unit, shipping carton 315.00 x 182.00 x 172.00 mm, Group Code R220 / Product Group X0DJ — these are the fields the ERP and the inbound-receipts desk use to confirm they have the right line before the box is opened, so they round out the procurement paperwork trace.