Active production status for the 1FL2 frame
The 1FL2203-2AG00-0SC0: The headline numbers — 0.2 kW rated power, 3000 rpm rated speed, 0.64 Nm standstill and rated torque from a 30 mm shaft-height frame — define the motor's slot in the S200 portfolio, and the 200 V 3AC supply voltage locks the pairing to that specific drive family rather than the higher-voltage S210 variant.
Mechanical and electrical ratings, and what they decide
A 30 mm shaft height with equal standstill and rated torque (0.64 Nm) is the marker of a low-inertia design optimised for high dynamic response rather than continuous heavy-duty use; sizing engineers should expect the motor to deliver short bursts above rated without stalling, but the thermal envelope at 0.2 kW continuous is what governs long-cycle duty. Plain shaft with tolerance N, no holding brake, and no oil seal are deliberate configuration choices — the absence of a brake removes a failure mode and simplifies integration on rotary axes where an external brake on the gearbox or the driven stage handles the safety stop; the plain shaft likewise expects the coupling side to provide the keying and balance. IP54 protection without an oil seal class means dust-protected and splash-resistant for cabinet-internal or light-industrial mounting, but not a sealed washdown rating — any deployment near coolant, food-grade washdown, or outdoor exposure needs an enclosure assessment beyond the motor's own sealing.
Drive pairing, feedback, and connector choice
The hybrid connector and 21-bit absolute encoder are the configuration that closes the loop with SINAMICS S200 — the encoder resolution determines the positioning accuracy floor and the hybrid cable carries both power and feedback in one assembly, so cable inventory is single-part rather than split power/feedback runs. Because this is product class C — produced to order, non-returnable, non-reusable — each unit ships as a configured build rather than off-the-shelf stock, which means any variation in shaft, brake, seal, or encoder against the -0SC0 suffix is a factory order line, not a field swap.
Compliance documentation and export posture
Siemens attests RoHS compliance for this part since 01-01-2018 and publishes REACH Art. 33 candidate-list information through the standard Reach Information channel, satisfying the substance-restriction disclosure expected by EU-bound panel builders. Export control classification carries AL:N and ECCN:N, so cross-border shipment is not gated by a dual-use or military-grade licence — the part moves as commercial industrial goods without an export permit requirement.
Logistics and procurement posture
Single-piece packaging with carton dimensions of 315 mm × 182 mm × 172 mm gives inbound logistics a defined footprint per unit, useful for pallet planning on a multi-piece build. Internal group code R220 and product group X0DJ are the Siemens reference keys for this motor's catalog position — useful to cite on a PO or in a supplier-portfolio review so the spend-under-management line rolls up against the correct commodity bucket rather than a generic servo-motors category. For procurement, 1FL2203-2AG00-0SC0 is sourced through independent distribution on a quoted-to-order basis: pricing and lead time are confirmed at RFQ, with availability tied to the configured-build nature of class C products rather than a standing shelf stock.