What the order code pins down
The 1FL2203-2AG00-1SC0: The part is a SIMOTICS S-1FL2 low-inertia servo motor from the 1FL2 family sized for the SINAMICS S200 drive line, with a 200 V 3AC supply rail, rated power Pn of 0.2 kW and rated speed Nn of 3000 rpm; both standstill torque M0 and rated torque Mn sit at 0.64 Nm, which tells you the motor is intentionally run close to its continuous thermal ceiling at rated speed — sizing the load inertia to the motor's published inertia ratio is the design check, not the headline kW figure. Mechanical fit is fixed by the SH 30 mm flange, an N-tolerance keyed shaft, and the absence of a holding brake; encoder feedback is the 21-bit single-turn hybrid version delivered through the AS21 hybrid connector, and sealing is IP54 without an oil seal — so this variant is meant for clean cabinet interiors, not wet-end or food-grade washdown duty. Lifecycle reads active on the order code; production status is current per the listing, so the BOM line stays buildable and there is no last-time-buy date to chase today.
Orderability and packaging
Stock class is C — built to order, non-returnable — so lead time is driven by the factory window rather than shelf stock; packaging is 1 piece per shipper box at 315.00 x 182.00 x 172.00 mm, which is the size you'll need on the receiving bench, not a field-mounting dimension.