SIMOTICS S-1FL2 low-inertia servo, 0.2 kW at 3000 rpm
The 1FL2203-2AG01-1HC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family built to run on the SINAMICS S200 drive platform (cites:,). It is rated at 0.2 kW with a rated speed of 3000 rpm, a continuous/peak torque figure of 0.64 Nm, and a 200 V 3AC supply — values that put it squarely in the compact, low-inertia end of the S-1FL2 line where positioning axes and small-format automation cells sit (cites:). Holding-brake option is not fitted on this code; the shaft carries a half-key with N tolerance and the housing is sealed to IP65 with an oil seal, which suits machine-mount installations in factory automation where occasional wipe-down is expected (cites:).
Mechanical envelope and what lands on the integrator's desk
Packaged as a single-piece shipment at 315.00 x 182.00 x 172.00 mm, the motor is built to order under product class C and cannot be returned against credit — BOM freeze before release is the responsible move (cites:,). The shaft height of 30 mm and the hybrid connector on the back end define the panel-side integration: a matching SINAMICS S200 power module on the drive side, the hybrid cable set linking motor to drive, and a 17-bit absolute encoder for commutation feedback (cites:).
Lifecycle, compliance, and the documentation a buyer will be asked for
RoHS compliance is declared from 01-01-18 onward and REACH Article 33 information is available on the manufacturer's compliance page, covering the two buyer-side documentation asks that recur on EU shipments (cites:,). Export-control markings are AL:N / ECCN:N, so no special export licence applies for standard cross-border industrial shipments (cites:).