What the 1FL2203-2AG01-1SC0 is built for
The 1FL2203-2AG01-1SC0 is a Siemens SIMOTICS S-1FL2 low-inertia servo motor rated 0.2 kW at 200 V three-phase, delivering 0.64 Nm holding and rated torque at up to 3000 rpm. The 30 mm shaft height puts it in the compact end of the 1FL2 family, and the hybrid connector AS21bit carries both power and encoder signals in a single mated pair — eliminating a separate encoder cable run on the machine side. The shaft key with N-keyway tolerance provides a positive mechanical lock to the driven load — important for cut-of-motion or indexing applications where backlash matters more than quick-connect coupling. No holding brake is fitted in this variant, so the motor relies entirely on the drive's regenerative or external braking to hold position when stopped.
IP65 rating and washdown integration
IP65 with oil seal means the motor body is dust-tight and protected against water jets from any direction — the oil seal covers the shaft exit, a critical sealing point on any motor that runs coolant or lubricant nearby. This makes the 1FL2 line suited for packaging machinery, textile equipment, and similar environments where periodic washdown is standard but full immersion is not.
Pairing with SINAMICS S200
The motor is catalog-listed as a matching drive option for the SINAMICS S200 family, a compact servo drive series positioned for simple positioning and speed-control tasks. The 21-bit absolute encoder (AS21bit) embedded in the hybrid connector provides single-turn resolution sufficient for most point-to-point positioning requirements — the system self-calibrates the commutation angle on first power-up so no manual encoder alignment is needed.
Compliance and product-class reality
RoHS compliance is confirmed since 2018-01-01, and REACH Article 33 duty-to-inform applies — a relevant checkbox for any buyer compiling substance declarations for finished equipment. The listed Product class is C: manufactured to order, non-returnable. This is a key sourcing flag — the unit is not pulled from stocked inventory on a repeat-order basis; it enters production against a confirmed purchase order, so lead time is set at order entry, not from shelf.
Sourcing the 1FL2203-2AG01-1SC0
The part carries Active lifecycle status. Group Code R220 and Product Group X0DJ are the catalog cross-reference fields if you are matching this against a bill of materials or a distributor inventory search. Quoted to order through independent distribution against the BOM quantity; availability and current lead times confirmed at RFQ.