0.2 kW at 3000 rpm — the working envelope
The 1FL2203-2AG10-0SC0 is a Siemens SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family sized for SINAMICS S200 drives, built to a 200 V 3AC supply with a rated power of 0.2 kW and a rated speed of 3000 rpm — the same 0.64 Nm shows up as both M0 (stall/continuous) and Mn (rated), so this frame has no torque-derate zone between zero and base speed. Shaft height 30 mm, plain shaft with tolerance N, and a holding brake fitted as standard — the frame that lands on a small slide or pick-and-place axis where the brake holds position on power loss without oversizing the motor. A 21-bit hybrid connector (AS-i style multi-turn encoder link) is the feedback interface; sealing is IP54 without an oil seal, which is a panel-side / cabinet-side duty rating — not a washdown rating, so keep it out of coolant splash zones.
Ordering codes and product-class flag
Siemens lists Group Code R220 and Product Group X0DJ on the line, and the product class flag is the order-to-build class: items in this class cannot be returned for credit or reused once built, which is the typical signal that the motor is wound to the connector and encoder options chosen at order entry. Packaging is single-piece (1 Piece quantity unit, packaging quantity 1) in a 315 x 182 x 172 mm box — the motor ships configured to the order code, not from generic shelf stock.