What 1FL2203-2AG10-1HC0 brings to the SINAMICS S200 cabinet
The Siemens 1FL2203-2AG10-1HC0 is a 1FL2 low-inertia servomotor sized to plug straight into a SINAMICS S200 drive — rated 0.2 kW at 3000 rpm with a continuous stall and rated torque of 0.64 Nm, which keeps the sizing math simple for a small-axis feed or auxiliary drive in a packaging or assembly machine. The shaft height of 30 mm and the 200 V 3AC supply class put this unit in the compact-machine bracket, and the holding brake plus 17-bit single-turn absolute encoder (hybrid AS connector) are bundled into the order code, so the BOM line carries one part number rather than a motor-plus-options stack.
IP54 with no oil seal on the shaft — adequate for general industrial cabinets and light-duty machine interiors where splash and dust ingress are present, but not rated for washdown or food-grade zones that demand IP65 or higher. The Tolerance N shaft with keyway is the standard press-fit coupling arrangement; a backlash-free coupling is the usual pairing when the downstream gearbox or lead screw demands zero cyclic play.
Compliance paperwork for inbound inspection
RoHS compliance has been in force for this code since 01-01-18, and the supplier carries the REACH Art. 33 duty-to-inform statement on file — both belong on the declaration package for any EU-bound shipment, and the same paperwork satisfies most industrial OEM incoming inspection checklists.
Procurement posture for a make-to-order servo line
Siemens lists 1FL2203-2AG10-1HC0 under product class C — built per order, not returnable for credit — which means the procurement commitment happens at PO release rather than at delivery, and lead time is firm against the configuration locked in the order code.