Matched SINAMICS S200 drive — a purpose-built pair
The 1FL2203-2AG10-1SC0 is a SIMOTICS S-1FL2 low-inertia servo motor rated 0.2 kW at 3000 rpm, listed as current in the Siemens lifecycle and paired as standard with the SINAMICS S200 drive family. Rated 0.64 Nm both at standstill (M0) and through the continuous torque band (Mn) — the motor and drive are sized together so that the S200's current loop and the motor's thermal limits align at this torque point without headroom waste.
21-bit AS21 encoder and holding brake — precision positioning in one package
The hybrid AS21 connector carries a 21-bit absolute position encoder — that is over 2 million counts per revolution, which handles the finest pitch-lead screw or index table division in a packaging or assembly axis without gear reduction or soft-layer scaling tricks. The integral holding brake clamps the shaft when the drive is disabled — critical on any vertical load or gravity-offset axis where the motor must hold position between cycles without a mechanical detent. The brake adds no additional panel space; it is integrated into the motor rear cap.
IP54 without oil seal — clean, enclosed environments
IP54 means the motor housing seals against splashing water from any direction and is protected against solid objects above 1 mm. Without an oil seal the shaft bore is not gastight — this is the standard rating for enclosed cabinet-mounted axes, not washdown or hose-directed spray. For food-line or high-pressure wash zones the oil-seal variant of this frame would be required instead. The 30 mm shaft height places this motor in the compact SINAMICS S200 frame range — the matching hybrid connector, IEC-standard shaft key, and DIN-keyed output simplify coupling to standard reducers, timing belt pulleys, or leadscrew assemblies without custom adapter flanges.
RoHS and REACH compliance — regulation-ready for EU deployment
RoHS compliance is confirmed from January 2018 onward, so EU machinery placed on the market under the Machinery Directive 2006/42/EC is covered without restriction. REACH Article 33 duty-to-inform documentation is flagged as available — for a servo motor the substance concern is typically connector plating and cable jacketing; the Reach Information sheet should be requested at RFQ for any direct-to-OEM OEM delivery documentation pack.
Made-to-order product class — confirm lead time before committing the BOM
This part carries product class C — manufactured to order, non-returnable — which means there is no shelf stock buffer and lead time is confirmed only against a firm purchase order or RFQ. The current lifecycle status means Siemens is actively taking orders for this specific order code, but for any BOM quantity above a single piece a lead-time check against the factory backlog is the first action before the line is committed.