0.2 kW at 3000 rpm in a 30 mm frame
The 1FL2203-2AG11-0SC0 from the SIMOTICS S-1FL2 family is sized for low-inertia motion on a 200 V 3AC bus — 0.2 kW rated power, 3000 rpm nominal speed, and a 0.64 Nm figure that holds for both standstill (M0) and rated (Mn) operating points, so the motor does not lose torque headroom as it ramps out of stall. The shaft height is 30 mm with a plain shaft to tolerance N, an integrated holding brake, and a hybrid connector — designed to drop straight onto a SINAMICS S200 drive without an extra cable breakout or third-party brake rectifier.
IP65 with oil seal — washdown and gear-side mounting
Protection class IP65 with oil seal means the body withstands water jets and the shaft pass-through stays sealed against gear oil or coolant splash — appropriate for food-and-beverment packaging lines, machine-tool feeders, and any conveyor cell where the motor lives below the panel rather than inside a clean enclosure. The hybrid cable connector carries power and the 21-bit absolute encoder signalling in one assembly, so a replacement during a line-down event is a single connector click rather than a multi-cable re-termination.
Stocking notes for the storeroom
Group Code R220 and Product Group X0DJ identify this variant inside the Siemens ordering system — quote the full 16-character code with the suffix intact so the drive auto-commissions the matching motor parameters on first connect.