What 1FL2203-2AG11-1HC0 puts on the shaft
The 1FL2203-2AG11-1HC0 is a SIMOTICS S-1FL2 low-inertia servo in the 200 V three-phase class — 0.2 kW rated power at 3000 rpm, with standstill and rated torque both at 0.64 Nm, which suits small positioning axes and light conveyor or pick-and-place loads that need a fast ramp into the working speed. It belongs to the 1FL2 product family explicitly paired with the SINAMICS S200 drive line, so the motor and drive electronics share a single cable-and-parameter story rather than a third-party retrofit.
Mechanical and environmental envelope
At a 30 mm shaft height with a keyed shaft (tolerance N), an oil-sealed IP65 housing, and a factory-fitted holding brake, the unit is built for panel-side mounting in machinery where shaft sealing matters — washdown-adjacent lines, packaging heads, or any axis where residual torque must be held after power-off without an external brake. The hybrid connector and 17-bit absolute encoder round out the commissioning picture — wiring to the matching SINAMICS S200 is a single-cable topology, and the absolute encoder avoids the home-return routine after every power cycle.
Lifecycle, compliance, and BOM traceability
Lifecycle status on this order code is listed as active, and the group code R220 / product group X0DJ ties the line item back to the Siemens ordering system for accurate BOM reconciliation and invoice matching. Product class is C: built-to-order, non-returnable — this is not a shelf item, so production quantities need a forecast and the lead time must be quoted at RFQ rather than pulled from stock. RoHS compliance is declared since 01-01-18 and REACH Article 33 information is on file through the standard Siemens reach-information channel, giving the export-pack and incoming-goods inspection the substance declarations they expect.