What the order code delivers
The 1FL2203-2AG11-1SC0 is a SIMOTICS S-1FL2 low-inertia servo motor from the 1FL2 family designed to pair directly with a SINAMICS S200 drive on a 200 V three-phase bus. Its rated performance is 0.2 kW with 0.64 Nm of continuous stall and rated torque, on a 3000 rpm speed base — so the motor reaches its constant-torque ceiling at that speed before the field-weakening region of the SINAMICS S200 control loop takes over. The shaft height is 30 mm, with a keyed shaft (tolerance N), an integrated holding brake for vertical-axis or load-holding duty, and a 21-bit high-resolution encoder read through the hybrid connector — the encoder line count and commutation feedback stay inside one cable assembly.
Mechanical fit and field-side integration
IP65 with oil seal on the shaft side means the motor tolerates coolant splash and oil mist around the machine, but the rating applies to the housing and seal assembly, not to the cable exit — the hybrid mating connector must be seated and gasketed to keep the wet side out. With a 30 mm shaft height the 1FL2203-2AG11-1SC0 occupies the small-frame slot in the family; gearbox and planetary adders from the 1FL2 accessory range mount against the same pilot and bolt circle, so the BOM line can stay inside one servo family across frame sizes.
Compliance file for the supplier-quality review
Group Code R220 and Product Group X0DJ on the Siemens internal classification locate the part inside the 1FL2 product family for cross-reference and warranty routing, and the export-control classification carries AL:N / ECCN:N so no export licence gate is triggered for the standard industrial destinations.
Sourcing posture for the BOM line
Lifecycle is reported as current on the manufacturer's record, and the product class flag means the unit is built to order — not a stocked shelf item — so the procurement commitment moves through the configured-order channel rather than off-the-shelf inventory.