400 V 3AC, 0.4 kW, 1.27 Nm — envelope of the 1FL2 low-voltage servo
The 1FL2203-4AF00-0HC0 is a Siemens SIMOTICS S-1FL2 low-voltage servo from the 1FL2 family sized for the SINAMICS S200 drive line, drawing 400 V 3AC supply and rated Pn = 0.4 kW at Nn = 3000 rpm with both standstill and rated torque at M0 = Mn = 1.27 Nm. The shaft height is 30 mm, so the motor is a compact-format drive end — typically feeding small conveyor, index table, or light-feed-axis loads where the 1.27 Nm continuous figure governs motor selection rather than the 0.4 kW nameplate. Encoder is a 17-bit absolute singleturn (AS17bit) resolved through a hybrid connector, with a plain shaft to Tolerance N and no holding brake fitted — meaning the downstream drive must handle any Z-axis gravity load via mechanical counterbalance or a second brake option. Pairing is fixed to the SINAMICS S200 converter; the cable set is the hybrid link, not the older SLS/SBM moulded lead.
IP54 housing and the made-to-order commercial class
Protection class is IP54 without an oil seal — adequate for a cabinet interior or a clean dry machine room, but it does not survive washdown or oil-mist exposure the way an IP65/IP67 servo would; if the line has cutting fluid or food-grade cleaning in the motor's vicinity, an alternative with a sealing option belongs in the BOM. The product sits in product class C: built to order against the configured option code, non-returnable and non-reusable on credit — so the exact option string (shaft, brake, encoder, connector) is locked at order entry and the line cannot be cancelled for credit once scheduled. Quantity unit is 1 piece; packaging footprint is 315 x 182 x 172 mm, consistent with the 30 mm shaft-height frame.
Lifecycle posture and compliance signal
Lifecycle stage is listed as current and product status is Active — the 1FL2203-4AF00-0HC0 remains in normal production within the 1FL2 / SINAMICS S200 generation. Export control markings are AL: N and ECCN: N, so cross-border shipment does not trigger an export-licence review under the standard dual-use lists; for a Singapore desk pulling APAC-built stock into Europe or the Americas this is a clean customs line, with only the usual commercial-invoice provenance paperwork needed. RoHS compliance is declared since 01-01-18 and REACH Article 33 candidate-list duty-to-inform is flagged as Reach Information — meaning the part meets the substance restrictions applicable to industrial electrical equipment placed on the EU market, with any SVHC above the threshold published via the manufacturer's REACH information page. Group code R220 and product group X0DJ are the internal classification anchors for Siemens ordering and warranty handling, useful when raising a case with the manufacturer's regional office.