0.4 kW, 1.27 Nm, 3000 rpm — sized for the SINAMICS S200 axis
The 1FL2203-4AF01-0MC0 is a SIMOTICS S-1FL2 low-inertia servomotor rated for a 400 V 3AC supply with a rated power of 0.4 kW and a rated speed of 3000 rpm; the standstill torque M0 and rated torque Mn both land at 1.27 Nm, which is the figure the SINAMICS S200 commissioning tool uses for the motor block load inertia matching. Mechanically it ships with a 30 mm shaft height, a plain shaft with tolerance N, a hybrid AM21bit encoder connector, and no holding brake — meaning the panel builder must verify brake requirements separately if the axis is vertical or back-driven at standstill.
IP65 with oil seal — washdown-adjacent packaging line duty
The housing carries an IP65 rating with an oil seal fitted, so the motor tolerates splash and light washdown typical of food-and-beverage, packaging, and end-of-line machinery — though it is not a full immersion-rated IP67/IP69K device, and the radial shaft seal is the wear item that dictates service interval, not the bearing grease. The hybrid AM21bit connector carries both power and the absolute encoder signal in one plug, which simplifies the cabinet-to-motor cable run on a SINAMICS S200 cabinet-mounted drive and reduces the gland-plate count on the panel.
Ordering class R220 / X0DJ — made-to-order, not returnable
Group code R220 and product group X0DJ locate this part on the Siemens configurator, and the product class flag is explicit: this is a product manufactured or produced to order that cannot be reused, re-utilised, or returned against credit — which is the line-item a procurement desk reads before signing off on a non-cancellable BOM entry. Quantity unit is 1 piece per package, packaged at 315.00 x 182.00 x 172.00 mm — a single motor in a single box, which keeps inbound inspection simple but means any partial quantity still ships the full packaging footprint.
RoHS, REACH Art. 33, and export classification on record
RoHS compliance has been confirmed since 01-01-18, and REACH Article 33 duty-to-inform applies with the current SVHC candidate list referenced — meaning the buyer should expect a candidate-list disclosure in the shipping documents for any SVHC above the 0.1 % w/w threshold.