A 0.4 kW S-1FL2 matched one-for-one to the SINAMICS S200
The 1FL2203-4AF11-0MC0 is a SIMOTICS S-1FL2 servomotor out of the 1FL2 family intended for direct pairing with the SINAMICS S200 drive line, which is exactly the combination the order code is engineered around. Continuous ratings are 0.4 kW at 3000 rpm with a rated torque of 1.27 Nm that also equals the standstill torque, fed from a 400 V 3AC supply — sized for compact machine axes where the motor delivers its full torque envelope from zero speed without derating. The motor carries a holding brake for vertical-axis and gravity-loaded applications, an AM21bit hybrid connector for the power and feedback bundle, and an IP65 protection class with an oil seal on a 30 mm shaft height plain shaft — meaning the unit holds up to coolant splash and oil mist typical of a small machine-tool or packaging-line environment when the connector and seal are properly mated.
Built-to-order class C — order quantity, not shelf stock
Product class C applies: the unit is manufactured / produced to order and cannot be reused, re-utilised, or returned against credit, which means stocking strategy is about ordering against confirmed BOM demand rather than pulling from a returns pool. Lifecycle stage is reported as current and the part carries an Active product status — production is ongoing with no official successor or LTB notice on the record for this order code. Export classification is AL:N / ECCN:N, so the part ships without a special export licence on the usual commercial channels. Each unit ships as one piece in a 315 × 182 × 172 mm package — useful for the receiving bench to confirm carton count and to plan shelf footprint when the motor is held as a critical spare.
Group code, compliance and the documentary trail
RoHS compliance has been in force since 01-01-18, and REACH Art. 33 duty-to-inform applies per the current candidate list, with the supporting Reach Information document carried with the product record.