Is the 1FL2203-4AF11-1HC0 still in active production?
Its compact 0.4 kW rating at 3000 rpm with stall and rated torque both at 1.27 Nm puts this frame in the small-payload pick-and-place and auxiliary-axis class — small enough to bolt inside a feeder or labeler head, big enough to drive a small conveyor with margin.
Feedback and brake: what the design carries
A 17-bit single-turn absolute encoder rides on the rear, resolving position to roughly 5 arc-seconds per count — fine enough that the current loop closes cleanly without audible cogging torque at low speed. An integrated holding brake gives the vertical-axis a safe parked state at power removal; combined with the IP65 seal and oil seal at the shaft pass-through, the motor holds up to coolant splash and the typical washdown profile of a beverage or pharmaceutical cell.
How the motor sits in the panel
The 30 mm shaft height and keyed shaft with tolerance N mean the motor drops into the standard small-frame mounting footprint for the 1FL2 series — fix the alignment before you trust the coupling, and verify the encoder cable bend radius because the hybrid connector carries both power and feedback. Shipping/handling: each unit arrives in a 315 x 182 x 172 mm carton at one piece per package, so a four-axis retrofit is a manageable freight parcel rather than a pallet.
Compliance and commercial class
RoHS compliance has been in force since 01-01-18, and REACH Article 33 duty-to-inform is listed on the order record — buyers in the EU get the candidate-list disclosure where applicable. Export control classification shows AL:N / ECCN:N, so cross-border shipment does not require a per-line export license under the common classifications. The product class flags this as a made-to-order item that cannot be returned against credit — build the BOM line once and freeze quantity before placing the PO.