Servo motor identity and matching drive
The Siemens 1FL2203-4AG10-0HC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family, sized for the SINAMICS S200 drive platform and wound for a 200 V three-phase supply. At a shaft height of 30 mm and 1.27 Nm rated / stall torque, it covers the small-frame end of the S200 line — typically feeding conveyors, small indexing tables, feeders and labelling heads where positioning repeatability matters more than continuous torque. It ships with the hybrid AS17bit absolute encoder, a plain shaft to tolerance N, and an integrated holding brake, which simplifies vertical-axis drop protection without a separate brake resistor block. Protection class is IP54 with no oil seal — fine for cabinet-interior and light industrial atmospheres, not for washdown or wet food-and-bev.
Rating read for the integrator
Pn = 0.4 kW and Nn = 3000 rpm define the continuous operating point, with M0 = Mn = 1.27 Nm — the equal stall and rated torque tells you the motor is constant-torque rated across its working speed range rather than a fan-cooled high-speed machine. For sizing, the 1.27 Nm ceiling is the number to budget against inertia mismatch on horizontal axes. Encoder feedback is the single-turn/multi-turn AS17bit absolute variant over the hybrid connector, so the drive resolves position to about 131 072 steps per revolution without a homing run on power-up — important if the machine loses mains between shifts.
Production status and ordering class
Group code R220 and product group X0DJ are the SAP slots a procurement system will read off the order confirmation. The product class field flags the motor as built to order — non-returnable, non-reusable — which means each unit ships against a confirmed PO rather than from shelf stock; lead time is the factory window for that build. Packaging is one piece per box at 315.00 x 182.00 x 172.00 mm, so a small-frame line spare or a four-axis retrofit fits a single carton per axis.
Compliance and trade-control posture
RoHS substance compliance has been declared since 01-01-18 and REACH Article 33 candidate-list information is published in the Siemens Reach Information register — the declaration pack is what an EU ship-out or an audit-trail review will look for first. Export control is AL:N / ECCN:N, so the motor is not on a controlled-goods list and ships under standard commercial paperwork.