What this servo is, and which drive it pairs with
The Siemens 1FL2203-4AG10-1SC0 is a SIMOTICS S-1FL2 low-voltage servomotor in the 1FL2 family, built to be paired one-to-one with a SINAMICS S200 drive — that paired pairing is the whole reason this motor carries the S200-matched option code, and the drive side has to be the SINAMICS S200 PN variant for the encoder channel and power section to line up. Electrical envelope on the nameplate: 200 V 3AC supply, rated power Pn = 0.4 kW, rated speed Nn = 3000 rpm, with M0 = MN = 1.27 Nm — a flat torque/rating profile across the constant-torque range, which is the shape small-parts feeders and index tables usually want. Mechanical and sealing: shaft height 30 mm, shaft key with tolerance N, hybrid connector on the cable side, absolute single-turn encoder (21-bit AS-i), IP54 enclosure rating with no oil seal, and a holding brake fitted — exactly the configuration you would pick for a vertical-axis small load where the brake has to hold at standstill.
Ratings in plain terms for sizing and panel layout
Pn = 0.4 kW at Nn = 3000 rpm sets the continuous mechanical output you can run without thermal derating — pair that with M0/MN = 1.27 Nm and you get the same torque available from zero speed up to rated speed, which simplifies the sizing math against a load's RMS torque demand. SH30 frame with IP54 is an indoor cabinet-mount frame, not a washdown food-grade motor — sealed against dust and splashing water from any direction, but the rating does not extend to high-pressure cleaning. The hybrid connector and the in-cabinet placement are what deliver that sealing in practice. Product class 'C' on this group-code line means the unit is manufactured/produced to order and is not returnable against credit — quoting posture is per BOM line, not from shelf-pull, which is the normal convention for built-to-order servomotors.
BOM identifiers, compliance, export status
Group Code R220 and Product Group X0DJ are the internal Siemens identifiers the procurement system uses to route the line; both belong to the SIMOTICS 1FL2 servomotor family on the SINAMICS S200 drive system, and they are the values your ERP will look up against the PO to confirm the right variant landed. RoHS compliance since 01-01-18 per the line record, with REACH Art. 33 duty-to-inform disclosure available on the product page — the documentation packet expected with a spares order is the standard RoHS/REACH statement, not a custom certificate. Export control registers AL: N and ECCN: N, which means no special export license is attached to a cross-border RFQ for this code — paperwork stays at the standard commercial-invoice level.
Lifecycle status and how to put it on a PO
Production status for the 1FL2203-4AG10-1SC0 is recorded as current/active on the official line — no end-of-life notice, no last-time-buy window flagged on this MPN, so it stays a quote-to-order line against the BOM quantity rather than a decommissioning buy. Handling note on receipt: the motor ships as a single-piece carton at 315 × 182 × 172 mm — keep the OE packaging until shaft alignment and encoder commissioning are signed off, since any handling damage to the shaft key seat or hybrid connector at unpack translates directly to commissioning rework.