400 V, 0.75 kW — the 1FL2204 in the S200 envelope
The Siemens 1FL2204-2AF00-0HC0 is a SIMOTICS S-1FL2 low-inertia servomotor wound for a 400 V 3AC supply, rated 0.75 kW at a rated speed of 3000 rpm with a continuous stall and rated torque of 2.4 Nm on both M0 and Mn — meaning the motor holds the same torque at standstill as at rated speed, useful for cyclic indexing and start/stop duty without torque step-down at the bottom of the speed curve. It sits in the 1FL2 family built as the native motor partner for the SINAMICS S200 drive line, so the electronics side of the pair is matched to the motor's electrical envelope rather than chosen separately — sizing stays inside one manufacturer pairing.
Mechanical build — 40 mm shaft height, plain shaft, no brake
Shaft height is 40 mm and the output is a plain shaft with tolerance N, without a holding brake — positioning of vertical axes therefore needs a counterweight, gravity-brake strategy, or an external brake on the gearbox side, since the motor itself cannot hold position under loss of power. Encoder feedback is an absolute single-turn 17-bit unit brought out through the hybrid connector, and protection class is IP54 without an oil seal, which is consistent with cabinet- or machine-internal mounting rather than direct washdown or food-grade exposure.
Compliance and order handling posture
Product class C flags this as built to order, not re-usable or returnable for credit, and the unit ships one piece per package at 382 x 222 x 240 mm — panel and order-planning should treat each motor as a configured line item rather than a shelf-pull.
Procurement reality — active line, built per order
Lifecycle stage is reported as current, so the 1FL2204-2AF00-0HC0 remains in active Siemens production today; with the build-to-order product class, however, availability is not 'off the shelf' — each unit is configured into the BOM and lead time confirmed against the RFQ rather than promised as an immediacy claim.