Active stock code for a 0.75 kW SINAMICS S200 axis
The Siemens 1FL2204-2AF00-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family, purpose-matched to the SINAMICS S200 drive platform. Lifecycle is recorded as active, so the part is on the current ordering roster rather than routed through a last-time-buy window. Rated for a 400 V 3AC supply, the motor delivers Pn = 0.75 kW at Nn = 3000 rpm with M0 = Mn = 2.4 Nm, which is a flat torque profile across the constant-torque range — useful where the load curve demands the same holding torque at low speed as at base speed. The shaft height 40 mm frame ships without a holding brake, with a plain shaft (tolerance N) and a hybrid AS21-bit encoder connector — sizing the mating cable and brake arrangement belongs on the BOM line, not as an afterthought on the panel.
Form factor, sealing and panel fit
Protection class is IP54 with no oil seal, so the body tolerates dust and splash but is not specified for washdown or food-grade environments; line integration should keep the motor out of direct jet exposure and away from coolant mist. Carton dimensions are 382.00 x 222.00 x 240.00 mm for a single-piece pack, which is the footprint to plan for in unpacking and kitting — not the motor's installed footprint on the machine.
Compliance dossier on file
Product class is recorded as C — built to order, non-returnable, non-reusable against credit — which matters for the procurement clause on the PO: once shipped, the line cannot be cancelled or restocked.
Ordering identifiers and supply posture
Group code R220 and product group X0DK are the internal commercial identifiers a Siemens ordering system uses for this line; carrying both into the RFQ lines up the quote against the same factory bucket.