SIMOTICS S-1FL2 servo motor — key specs
The Siemens 1FL2204-2AF01-1HC0 is a three-phase 400 V AC servo motor delivering 0.75 kW at 3000 rpm with a rated and holding torque of 2.4 Nm — the equal M0 and Mn figures mean the motor holds its full rated torque when stopped, which is the torque budget the shaft key and driven load see between motion cycles. Shaft height is 40 mm, the motor ships without a holding brake, and the shaft includes a key with tolerance N. The AS17bit absolute encoder uses a hybrid connector — absolute position is retained across power cycles without a home-in move, reducing cycle time on every machine start.
IP65 seal — what it means for the installation
IP65 with oil seal classifies the motor as protected against dust ingress and low-pressure water jets from any direction. In a packaging line, plastic-film dust and periodic washdown spray are within the rating — a bare IP65 shaft seal is not submersible, but the oil seal handles shaft-through splash without a separate shaft bushing.
Matched to SINAMICS S200 — sourcing posture
The 1FL2204-2AF01-1HC0 is listed as matching the SINAMICS S200 drive family — that pairing is the approved combination for which torque-speed and encoder-loop parameters are characterised. The product lifecycle is Active (/), and the product class is C: manufactured to order, non-returnable. Made-to-order status means the unit is not drawn from finished-goods stock — procurement needs to factor lead time and minimum order quantity into the BOM plan. RoHS compliance is confirmed since 1 January 2018, and the part carries a REACH Article 33 duty-to-inform obligation — Siemens publishes the substance disclosure on request. The export classification is AL:N / ECCN:N with no EAR restrictions.