What the 1FL2204-2AF01-1SC0 actually delivers
The 1FL2204-2AF01-1SC0 is a Siemens SIMOTICS S-1FL2 low-inertia servomotor in the 40 mm shaft-height frame, sized at Pn 0.75 kW with a rated speed Nn 3000 rpm and a continuous/stall torque of 2.4 Nm. It is built specifically as the motor half of a SINAMICS S200 drive pairing, fed from a 400 V 3AC supply bus, which sets the upstream converter sizing and the line filter topology at commissioning. The encoder is the AS21 21-bit absolute single-turn device read over the hybrid connector — that signals which cables, motor modules and commissioning parameter sets on the SINAMICS S200 will accept the unit at first power-up; substituting a non-AS21 feedback will not drop into the same firmware slot. No holding brake is fitted and the shaft is a keyed, Tolerance N configuration, so the coupling half on the driven machine must absorb the axial play and present a keyway to match.
Mechanical envelope and panel-side footprint
The motor ships as a single-piece unit in a 382.00 x 222.00 x 240.00 mm pack, which is the cabinet/freight dimension rather than the bare flange — plan for that footprint when mounting to a machine frame, accounting for the cable bending radius behind the hybrid connector and the orientation of the conduit entry on site. Protection class IP65 with oil seal specifies a wet-duty shaft sealing arrangement, so the unit is suitable for machine environments where coolant splash and oil mist reach the motor face but not direct jet washdown.
Compliance documentation available on the order
Export control regulations carry AL:N / ECCN:N, which simplifies cross-border shipment paperwork. Production status is active per the manufacturer's lifecycle record, so the BOM line can be planned against current manufacturing with no last-time-buy window yet announced. The product is classified by Siemens as a Class C made-to-order item — produced to specification, non-returnable for credit — and is packaged one piece per unit.