S-1FL2 servo at 0.75 kW, paired to SINAMICS S200
The Siemens 1FL2204-2AF10-0MC0 is a SIMOTICS S-1FL2 low-inertia servo in the 1FL2 family, sized at 0.75 kW on a 400 V 3AC supply with a rated speed of 3000 rpm and matched continuous torque of 2.4 Nm — the same figure is held as stall torque M0, so the motor runs flat-rated across the working speed range without torque foldback as it accelerates. Built on a 40 mm shaft height with a plain shaft (tolerance N), an integrated holding brake, and an AM21-bit hybrid feedback connector, the unit lands as the 0.75 kW member of the S-1FL2 line intended for direct drive-side pairing with the SINAMICS S200 servo drive — the drive and motor are coded as a matched set, not a free substitution. Sealed to IP54 without an oil seal, the motor tolerates typical cabinet-adjacent mounting where dust and light contamination reach the housing; washdown or wet-process duty would push the spec beyond what IP54 covers.
Packaging and handling on receipt
Shipped one piece per package at 382 × 222 × 240 mm — a single-motor carton sized for the 0.75 kW frame, not a multi-pack — so the receiving bench can plan lift assist and unbox space accordingly.