The 1FL2204-2AF11-0HC0 is a SIMOTICS S-1FL2 servo motor in the 1FL2 family, built to pair with the SINAMICS S200 drive on a 400 V 3AC supply, rated 0.75 kW at 3000 rpm with a stall and rated torque of 2.4 Nm on a 40 mm shaft height. It ships as a complete drive-side assembly: a plain shaft to tolerance N, an integrated holding brake for vertical-axis holding, and IP65 protection with an oil seal at the shaft exit — the oil seal matters in gearbox-coupled layouts where lubricant back-pressure would otherwise creep past the bearing shield.
Active production, make-to-order class
Lifecycle reads as active (current), and the line is classed as make-to-order — product class C, manufactured per order quantity, not returnable against credit. Plan the BOM position as a build-to-order line with a quoted lead time, not a stocked SKU.
Feedback, brake, and what the kit contains
The motor carries a 17-bit hybrid (AS17) encoder, the resolution profile matched to SINAMICS S200 commissioning — enough for the standard positioning and synchronous servo use cases the S-1FL2 platform was specified for, without stepping up to a higher-end absolute encoder. Packaging is a single-piece shipper at 382 x 222 x 240 mm — a tidy carton footprint, easy to slot into a kitting shelf without a special cradle. Confirm the matching SINAMICS S200 drive, power cable, and encoder cable are on the same BOM line; the motor half is not usable without them.