Headline rating and where the motor sits in the system
The Siemens 1FL2204-2AG00-0MC0 is a SIMOTICS S-1FL2 low-inertia servo rated 0.75 kW continuous at 3000 rpm, with 2.4 Nm rated torque and 2.4 Nm standstill torque — so the rated figure and the stall figure collapse to the same number, which means the motor delivers its full nameplate torque across the full speed range up to rated without a thermal de-rating step inside that envelope.
Mechanical envelope, feedback, and brake fit
Shaft height 40 mm, plain shaft with tolerance N, no holding brake and no oil seal — the absence of the brake simplifies back-drive risk analysis but means the application must hold position via the controller or an external mechanism; the AM21bit absolute multi-turn encoder provides position feedback without a battery back-up module. Protection class IP54 with no oil seal — the sealing arrangement assumes a dry mounting environment, not a gearbox input where oil wicks past the lip seal, so a separate sealing solution is required when this motor is flange-coupled to a reducer with oil exposure. Wiring is via a hybrid connector on the motor face — the hybrid connector carries both power and encoder signals in a single assembly, which reduces panel-side wiring but means a single damaged connector can take both the power and feedback down at once during a fault.
Ordering class and compliance posture
Compliance posture per the record: RoHS-compliant since 01-01-18, REACH Article 33 duty-to-inform on the current candidate list applies, and the part carries export classification AL:N / ECCN:N, which keeps cross-border shipment documentation straightforward for most jurisdictions. Siemens lists lifecycle status as active and lifecycle stage as current — the part is in serial production on the Siemens record, which is the strongest single signal that a long-lead-time risk does not need to be priced into the procurement plan today.
How the motor is sourced
Made-to-order class means availability is confirmed against the RFQ response rather than pulled from spot stock, and pricing is set at quote time against the configured quantity — for procurement planning the realistic posture is a firm lead-time confirmation per order line, not a same-day pull. Siemens internal order-trace fields carried on the line are Group Code R220 and Product Group X0DK — useful for matching the line back to the original Siemens order paperwork during a tender audit or warranty claim, but they are not selection parameters.