Nameplate and machine role
The 1FL2204-2AG00-1HC0 is a SIMOTICS S-1FL2 low-voltage servomotor in the 40 mm shaft-height frame, rated Pn 0.75 kW at Nn 3000 rpm with M0 = Mn = 2.4 Nm, supplied from a 200 V 3AC drive in the SINAMICS S200 family (cite:). Holding brake is omitted, encoder is a 17-bit hybrid-connector unit, shaft is keyed to tolerance N, and the housing carries IP54 protection without an oil seal (cite:). That combination — short frame, modest torque, no brake, single-turn high-resolution feedback — fits positioning axes where the load is already held by the mechanism (a vertical axis on a counterbalance, a rotary table on a gear train) rather than axes that need a fail-safe park brake at standstill (cite:).
Ordering identity and product class
Siemens catalogs the motor under Group Code R220 / Product Group X0DK, sold singly as 1 Piece with no inner-pack multiple (cite:)(cite:)(cite:)(cite:). The product class is C — built to order, non-returnable, non-reusable against credit (cite:), which means the RFQ must carry the final machine variant and quantity up front; a return credit will not be issued if the winding or connector option does not match the build sheet. Packaging is 382 x 222 x 240 mm per piece (cite:); export-control markings are AL:N / ECCN:N, so no special license gate applies for the standard cross-border shipments (cite:).
Lifecycle status and compliance trail
The product is listed with current and an Active manufacturer status (cite:)(cite:), so it can be specified into a new BOM without a last-time-buy caveat. RoHS compliance has been on the record since 2018-01-01 (cite:), and REACH Art. 33 duty-to-inform applies — the latest candidate-list disclosure is referenced through the Reach Information link in the documentation pack (cite:). For a CE-marked European build that needs the technical file to close, request the RoHS/REACH declaration alongside the nameplate trace at quote time.